Pros and Cons

Let’s look at the pros and cons of each type of binder. Both binders wrap the bias tape or fabric around the edge of your project and hold it in place as it goes under the needle for stitching.

Bias Binder #87 is made for bias tape. This can be the kind you purchase at the fabric store in small packages. The good thing about using this type of binder is that you have no prep. You buy the tape and you’re ready to start binding. The not-so-good thing is that you are usually limited to a small number of solid colors when purchasing packaged bias tape. You can actually make your own bias tape by cutting bias fabric strips, then folding them and pressing them to fit into the binder. The problem with this is that you save no time because you have work to do before you can start to bind.

Bias Binder #88 is designed to be used with bias-cut strips of fabric. This method requires prep time in cutting the strips, although it is less than the cutting, folding and pressing for making bias tape. The big pay-off for using this type of binder is that you have the choice of thousands (or more) of fabrics to use. A medium weight, firmly woven fabric such as quilting cotton works best for binding, so you may choose almost any color and/or print imaginable.

Trimmed Handles

If you are making a purse or tote bag, sew binding along the handles to strengthen them. This also adds contrast and color, helping to coordinate the handles to the project. Cut webbing for handles and strips of fabric to fit the binder. Bind each long edge of the webbing to give a finished, decorative look to the handles.

No-Turn Tubes

One of my favorite uses of the binder is stitching folded binding together without fabric. This makes no-turn tubes to use as straps and ties. Cut the fabric to fit the binder and start sewing. The strips will be folded and stitched; you continue to sew until you have the desired length.

Drawstrings and Ties

These no-turn tubes are great for drawstrings or for ties on fabric books or journal covers.

Garment Finishes

Bound edges make beautiful finishes for garments. Using bindings in place of facings reduces bulk and adds a sophisticated look to a blouse or dress neckline.  The photo below shows the binding as a neckline finish that continues into straps that tie together as a closure.

 

PRODUCT

Bernina #VA95C Binder Foot 9mm to be used with Bernina Binder Attachments #87 & #88

$74.00

PRODUCT

Bernina #VA95 Binder Foot (5.5mm machines)to be used with Bernina Binder Attachments

$53.00

PRODUCT

Bernina Binder Attachment #87 Pre Folded 13mm (bias tape/stripe) to be used with Binder Foot VA95 (5.5mm Machines) VA95C (9mm Machines)

$294.00

PRODUCT

Bernina Binder Attachment #87 Pre Folded 25mm (bias tape/stripe) to be used with Binder Foot VA95 (5.5mm Machines) VA95C (9mm Machines)

$294.00

PRODUCT

Bernina Binder Attachment #88 Unfolded 32mm (bias tape) to be used with Binder Foot VA95 (5:5mmmachines) VA95C (9mm machines)

$349.00

PRODUCT

Bernina Binder Attachment #88 Unfolded 28mm (bias tape/stripe) to be used with Binder Foot VA95 (5.5mm Machines) VA95C (9mm Machines)

$349.00

PRODUCT

Bernina Binder Attachment #87 Pre Folded 20mm (bias tape/stripe) to be used with Binder Foot VA95 (5.5mm Machines) VA95C (9mm Machines)

$294.00

PRODUCT

Bernina Binder Attachment #88 Unfolded 38mm Bias Tape to be use with either VA95 (5.5mm Machines) VA95C ( 9mm Machines

$349.00